高级的设计
高级的设计
The 高级的设计 experience is a two semester course in which students experience the entire design process of a project. 学生们以团队形式完成预先批准的项目, 在两位指导老师的指导下, 并提交设计评审, 最终报告, 正式的演讲, 还有这个项目的演示. Students learn not only design methodology, but also non-technical aspects of engineering, including
- 项目计划
- 项目管理
- Teamwork
- 文档
- 知识产权
- 预算 & 可行性
- Ethics
- 健康与安全
- 可靠性
高级设计指引
A. 调度和前提条件
高级的设计 I is offered in the Fall semester and 高级的设计 II is offered in the Spring semester. Students should plan to take 高级的设计 according to this schedule only.
豁免:
- Exemptions from the prerequisites will be granted only by special permission, and only if (a) the student receives written permission from both the instructor and the department chair, and (b) the student meets all the prerequisites related to his/her proposed project, and (c) the exemption is necessary to avoid delaying graduation.
- 学生可以自由地做准备工作, 研究潜在项目, or get a head start on their projects at any time before starting senior design, however, projects will still be subject to review and approval at the start of 高级的设计 I.
B. 项目组
- A project group will consist of either two or three students. 小组可以包括其他专业的成员.
- Large projects involving more than three students may be proposed, 但是它们必须分成子项目, 每个教室有两到三个学生, and each subproject must be capable of being demonstrated and evaluated independent of the other subprojects. Each subproject must meet all of the requirements for project content (see below), and each subgroup must submit separate progress and final reports, 制作一个单独的演示, 完成所有课程要求.
- Since one of the course objectives is development of project teamwork skills, individual (single student) projects or subprojects are not permitted.
C. 项目竞赛要求
- 项目必须符合ABET标准4,即: 主要的设计经验, based on the knowledge and skills acquired in earlier coursework and incorporating engineering standards and realistic constraints that include most of the following considerations: economic; environmental; sustainability; manufacturability; ethical; health and safety; political.
- Projects must include at least two out of the following three components:
- Design, construction, and successful testing of digital electronic hardware
- Design, construction, and successful testing of analog electronic hardware
- Design, implementation, and successful testing of embedded or control software.
- Projects must incorporate subject material from several different manufacturing and industrial engineering classes, 在复杂程度上, 困难, and technical maturity that demonstrates competence in the subject area.
- 项目必须包括软件的应用, either embedded in the project or through the use of design software.
D. 项目完成要求
为了得到一个满意的成绩(a), B, or C) 所有项目的结果必须是:- a 成品,工作产品 这就是
- 系统地 tested,
- 记录 以全面的书面报告的形式,和
- presented to the manufacturing and industrial engineering faculty through oral 演讲 和实验室 示范.
在一般情况下, it is expected that final products will be substantially equivalent to the originally proposed project. This does not preclude modification of specifications or features for valid engineering reasons, provided that these modifications are approved by the faculty technical advisor(s) and the course instructor.
E. 高级设计I -特殊要求
为了得到一个满意的成绩(a), B, 或C)高级设计第一学期, 学生应该:- produce a preliminary design that is complete to the component level in hardware, 并在软件的流程图/算法层面.
- 进行定量分析, 模拟, 初步的实验室测试表明, to the satisfaction of the students technical advisor, 提出的设计理念是可行的.
- write and submit a comprehensive written report documenting the design and analysis.
- 符合教学大纲要求, including but not limited to: regular meetings with the faculty advisor,及时提交进度报告, 以及非正式和正式的设计呈现, including a major design 演讲 at the end of the first semester.
F. 高级设计II -特定要求
为了得到一个满意的成绩(a), B, 或C)高级设计第二学期, 学生应该:- meet the project completion requirements given in Section D above.
- 符合教学大纲要求,including but not limited to: regular meetings with the faculty advisor, 及时提交进度报告, 并提交最终书面报告, 口头报告, 和示范.
G. 项目建议书及顾问
- The instructor for 高级的设计 I will set a deadline and format for students to submit a project proposal, typically within the first three weeks of the semester.
- 项目提案的想法可能来自学生, faculty, or industry; however, each group is responsible for selecting and proposing a project.
- Proposals must be approved by the manufacturing and industrial engineering faculty.
- Students may suggest or request a particular advisor; however, final assignment of advisors to projects will be made by the instructor.
H. 未完成的项目,评分政策
- According to 金沙中国 university-wide grading policies effective starting 2008, grades of Incomplete (I) can only be issued for compelling medical reasons arising after 75% or more of the course has been completed, 并需要院长的批准. 这是对先前政策的改变.
- In order to consider 高级的设计 I completed and move on to 高级的设计 II, 学生的成绩必须达到a, B, or C.
- In order to consider 高级的设计 II completed and meet graduation requirements, 学生的成绩必须达到a, B, C, or D.
- Final decisions on grades are made by the Instructor of Record, 在学院技术顾问的指导下.